Nuestros Servicios

Reemplazo de receptáculos de 15A/20A, interruptores o módulos GFCI domésticos para áreas húmedas.

Installation of new electrical outlets, switches, and wiring for residential or commercial properties.

Supply and install hardwired or battery-backed smoke detectors and carbon monoxide alarms to meet local fire code and occupancy requirements. Base price is per detector, including wiring to existing circuit and interconnection with other units. Covers standard combination smoke/CO units; smart/connected detectors and additional circuit runs are quoted separately.

Run and terminate Cat6 data cabling for internet, phone, and AV distribution with wall plates and patch panel termination. Base price is per drop installed with standard cable routing in accessible walls or attic/crawl space. Covers standard Cat6 UTP cable and keystone jacks; Cat6A, fiber, conduit, and structured media enclosure upgrades are quoted separately.

Mounting and wiring of ceiling fans, recessed LED canisters, chandeliers, or outdoor floodlights into code-compliant junction boxes.

Install or replace a ceiling fan with light kit at an existing junction box location. Includes mounting bracket, balancing, and wiring to existing wall switch. Base covers standard fan mounting with an existing rated box; new fan-rated junction boxes, downrods for vaulted ceilings, remote receivers, and additional wall control wiring are quoted separately.

Assembling multi-blade fan assemblies, anchoring to heavy-duty fan-rated octagonal bracing boxes, splicing wiring, and matching downrod balancing weights.

Supply and install LED recessed can lighting (4" or 6" IC-rated housings with LED trims). Base price is per fixture installed on an existing or new circuit, including cutting, wiring, and drywall patch. Covers standard white baffle trims; smart, dimmable, wet-location, or decorative trims and dimmer switches are available as upgrades. Switch leg, dimmer, and circuit home-runs are quoted separately when new wiring is required.

Comprehensive electrical inspection to verify safety, code compliance, and capacity for insurance, real estate, or renovation planning. Includes evaluation of panel, grounding, GFCI/AFCI protection, wiring condition, and load adequacy with a written report and remediation recommendations. Base covers a single residential or small commercial unit; multi-unit or industrial inspections are quoted separately.

Wiring and mounting of smart video doorbells, floodlight cameras, or low-voltage security sensors. Includes device synchronization to local Wi-Fi.

Design and install low-voltage landscape and exterior lighting including path lights, uplights, and accent fixtures with a transformer and timer or photocell control. Base price is per fixture installed with buried low-voltage cable and transformer. Covers standard brass or aluminum fixtures; premium fixtures, smart control integration, and additional zones are quoted separately.

Installation of whole-house surge protective device (SPD) directly inside the main electrical panel to safeguard appliances from lightning strikes.

Install a whole-house surge protection device at the main electrical panel to protect appliances, HVAC, and electronics from voltage spikes. Base includes the surge protector, dedicated breaker, and grounding connection. Covers standard single-phase residential panels; three-phase commercial units and additional grounding electrode work are quoted separately.

Adding an auxiliary electrical sub-panel box to expand circuit capacity for garage workshops, pools, or detached home office additions.

Install a Level 2 EV charging station (240V/40–50A circuit) in a garage or exterior location. Includes dedicated circuit from panel, hardwired connection or NEMA 14-50 outlet, and mounting. Base covers installation within 50 ft of the panel with accessible routing; panel upgrades, trenching, or long conduit runs are quoted separately. Charger unit can be owner-supplied or provided at cost.

Replace or upgrade an outdated or undersized electrical panel to meet modern power demands and code requirements. Includes new panel (100–400 amp), main breaker, grounding/bonding, and circuit labeling. Covers labor and standard panel; utility meter base or service entrance conductor upgrades are quoted separately. Required when adding circuits, converting to electric appliances, or resolving breaker tripping and safety hazards. Final scope confirmed after a load calculation and on-site inspection.

Actualización estructural completa del panel con varillas de tierra dobles y sincronización de servicios públicos.

Supply and install a standby home generator with automatic transfer switch (ATS) for backup power during outages. Base covers generator pad, unit placement, fuel line connection (natural gas or propane), ATS, and electrical interconnection to the main panel. Covers air-cooled units 10–22 kW; liquid-cooled or larger commercial units, propane tanks, gas meter upgrades, and HOA-approved enclosures are quoted separately. Final scope confirmed after a site assessment and load sizing.

Installation of new electrical outlets, switches, and wiring for residential or commercial properties.

Configuración de conducto EMT metálico de superficie, circuitos dedicados industriales y cajas comerciales.

Supply and install hardwired or battery-backed smoke detectors and carbon monoxide alarms to meet local fire code and occupancy requirements. Base price is per detector, including wiring to existing circuit and interconnection with other units. Covers standard combination smoke/CO units; smart/connected detectors and additional circuit runs are quoted separately.

Run and terminate Cat6 data cabling for internet, phone, and AV distribution with wall plates and patch panel termination. Base price is per drop installed with standard cable routing in accessible walls or attic/crawl space. Covers standard Cat6 UTP cable and keystone jacks; Cat6A, fiber, conduit, and structured media enclosure upgrades are quoted separately.

Mounting and wiring of ceiling fans, recessed LED canisters, chandeliers, or outdoor floodlights into code-compliant junction boxes.

Assembling multi-blade fan assemblies, anchoring to heavy-duty fan-rated octagonal bracing boxes, splicing wiring, and matching downrod balancing weights.

Supply and install LED recessed can lighting (4" or 6" IC-rated housings with LED trims). Base price is per fixture installed on an existing or new circuit, including cutting, wiring, and drywall patch. Covers standard white baffle trims; smart, dimmable, wet-location, or decorative trims and dimmer switches are available as upgrades. Switch leg, dimmer, and circuit home-runs are quoted separately when new wiring is required.

Despacho de respuesta industrial inmediato para fallas de energía comercial o problemas de seguridad.

Comprehensive electrical inspection to verify safety, code compliance, and capacity for insurance, real estate, or renovation planning. Includes evaluation of panel, grounding, GFCI/AFCI protection, wiring condition, and load adequacy with a written report and remediation recommendations. Base covers a single residential or small commercial unit; multi-unit or industrial inspections are quoted separately.

Wiring and mounting of smart video doorbells, floodlight cameras, or low-voltage security sensors. Includes device synchronization to local Wi-Fi.

Design and install low-voltage landscape and exterior lighting including path lights, uplights, and accent fixtures with a transformer and timer or photocell control. Base price is per fixture installed with buried low-voltage cable and transformer. Covers standard brass or aluminum fixtures; premium fixtures, smart control integration, and additional zones are quoted separately.

Installation of whole-house surge protective device (SPD) directly inside the main electrical panel to safeguard appliances from lightning strikes.

Install a whole-house surge protection device at the main electrical panel to protect appliances, HVAC, and electronics from voltage spikes. Base includes the surge protector, dedicated breaker, and grounding connection. Covers standard single-phase residential panels; three-phase commercial units and additional grounding electrode work are quoted separately.

Adding an auxiliary electrical sub-panel box to expand circuit capacity for garage workshops, pools, or detached home office additions.

Install a Level 2 EV charging station (240V/40–50A circuit) in a garage or exterior location. Includes dedicated circuit from panel, hardwired connection or NEMA 14-50 outlet, and mounting. Base covers installation within 50 ft of the panel with accessible routing; panel upgrades, trenching, or long conduit runs are quoted separately. Charger unit can be owner-supplied or provided at cost.

Replace or upgrade an outdated or undersized electrical panel to meet modern power demands and code requirements. Includes new panel (100–400 amp), main breaker, grounding/bonding, and circuit labeling. Covers labor and standard panel; utility meter base or service entrance conductor upgrades are quoted separately. Required when adding circuits, converting to electric appliances, or resolving breaker tripping and safety hazards. Final scope confirmed after a load calculation and on-site inspection.

Actualización estructural completa del panel con varillas de tierra dobles y sincronización de servicios públicos.

Three-phase commercial service panel upgrades, distribution board expansions, safety disconnect configurations, and engineered schematic layouts.

Supply and install a standby home generator with automatic transfer switch (ATS) for backup power during outages. Base covers generator pad, unit placement, fuel line connection (natural gas or propane), ATS, and electrical interconnection to the main panel. Covers air-cooled units 10–22 kW; liquid-cooled or larger commercial units, propane tanks, gas meter upgrades, and HOA-approved enclosures are quoted separately. Final scope confirmed after a site assessment and load sizing.